PORSCHE 356 C HEAT EX
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Product details:
Replaces blower motor assembly and ductwork. Perfect for summertime drivers education and club race cars
Features:
-fits all Porsche 964 Carrera vehicles (1989-1994)
-saves 10 lbs from rear of vehicle
-exact replica as used by the Porsche motorsports for factory lightweight 964 cup and 964 rsr race cars.
-replaces blower motor assembly and ductwork.
-cleans up engine bay for easier access
-simple diy installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1989-94
From $85.00
Make a selection
Loud & aggressive cup car sound with adjustable single or dual outlets
Features:
Adds 24 whp and 21 ft-lbs of torque to greatly improve throttle responce
General Fitment 911 1989-94
$3,921.95
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $2,795.00
Make a selection
Product details:
Loud & aggressive sports car sound with adjustable single or dual outlets
Features:
-fits all Porsche 964 c2, c4, rs america, euro rs and speedster vehicles 1989-199
-increases horsepower and torque by 24 whp and 21 ft-lbs without optional sport cats expect a great increase in power when including them.
-loud & aggressive sports car sound. Recommended for aggressive street and track usage.
-rsr-style 1 piece equal length mandrel-bent header tubes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors.
-constructed from 14-16 gauge t304l stainless steel
-dual outlet muffler system comes with all r...(choose a part on the right to read more)
General Fitment 911 1989-94
From $2,595.00
Make a selection
Loud & aggressive cup car sound with adjustable single or dual outlets
Features:
Adds 24 whp and 21 ft-lbs of torque to greatly improve throttle responce
General Fitment 911 1989-94
$4,707.65
Make a selection
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
Designed with f1-style merge collectors for maximum flow
General Fitment 930 1975-77
$3,398.15
Make a selection
Product details:
Replaces blower motor assembly and ductwork. Perfect for summertime drivers education and club race cars
Features:
-fits all Porsche 993 vehicles (1994-1998)
-saves 10 lbs from the rear of the vehicle
-cleans up engine bay for easier access
-simple diy installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
General Fitment 911 1994-98
From $100.95
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1970-73
From $4,428.51
Make a selection
Product details:
Replaces blower motor assembly and ductwork while still allowing plenty of heat, just like the factory rs part
Features:
-fits all Porsche 993 vehicles (1994-1998)
-saves 9 lbs from the rear of the car
-full carbon fiber construction
-simple diy installation
-this a replica of the Porsche Germany rs lightweight factory heat duct that was used on all 3.6 liter special rs lightweight race cars.
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note:
All late model 993's, 1996-1998 require the Porsche factory 964 fan shroud, part # 96410640302
General Fitment 911 1994-98
Product details:
High-quality performance headers provide better boost response and power throughout the rpm range.
Features:
-fits all 993 turbo / turbo s vehicles (1995-1998)
-increases horsepower by 15 whp and improves throttle response
-saves 9 lbs from the rear of the vehicle
-available with or with out heat exchange
-features high velocity 3-into-1 pyramidal inverted cast merge collectors for improved exhaust scavenging.
-constructed from high-quality 14-16 gauge c.n.c. Mandrel-bent t304l stainless steel for optimum flow and maximum durability
-all fabspeed performance products are backed by the fabspeed lifetime ...(choose a part on the right to read more)
General Fitment 911 1994-98
From $1,895.00
Make a selection
Fits: 3.2 (84-89), SC 3.0 (78-83), 3.0 Carrera (76-77), rs 3.0l (74-74), rs 2.7 (74-76), 911 2.7 (74-77)
General Fitment 911 1970-73
$4,093.87
Make a selection
As with any fan, bearings can fail, they can draw a high number of amps or there can be an electrical failure. Replace as needed and odds are that if the right side has failed the opposing side may be on the way out also, the left side is part # 96457201501 sold individually. 1 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
View/Change Diagram
From $170.00
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$4,119.03
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1970-73
From $3,625.91
Make a selection
Free flow exhaust kits for the 911 2.7 l and 3.0 l models from 1976-83, improve sound and performance, while reducing backpressure and thermal load on the motor. These kits are based off the early style exhausts found on the 1974 2.7 l rs. They had a straight through, superior, free flow exhaust design that included a dual inlet muffler.
Our FVD free flow kits contain a variety of dansk exhaust products, stainless steel industries (ssi) exhaust products, bursch exhaust products, Porsche genuine parts and original equipment manufacturer (oem) parts.
FVD BrombacherGermany conveniently combines these quality products, to offer the widest range of sound levels and performance. Sound levels range from mild, m...(choose a part on the right to read more)
General Fitment 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$3,845.16
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
General Fitment 911 1970-73
From $3,563.36
Make a selection
Besteht aus :
- wärmetauscher links + rechts aus edelstahl
- endschalldämpfer " rennen" edelstahl mit 1 ausgang 70mm
- montagekit´s bestehend aus dichtungen und schrauben
- veränderte Ölleitungen ( müssen bei monntage geändert werden).
General Fitment 911 1970-73
From $3,806.86
Make a selection
Fabspeed sport headers without heat are high quality performance headers that provide better boost response and power throughout the rpm range.
Features:
Features 3 into 1 high velocity merge collector
General Fitment 911 1989-94
$2,018.25
Make a selection
This silicone hose supplies hot air to the heater control box, it replaces original part # 930 211 622 01. It runs from the exhaust heat exchanger to the heater control box. We recommend replacing the heater box clamp, part # 90121105122 on one end and a hose clamp part # 99951234902 on the other end. Sold individually. 2 necessary per car.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Cost effectively repair your heater box flap with this kit. We source these parts from Porsche ag in Germany to ensure quality, reliability and precise fitment.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Oe im rs und rsr verbaut, klar mit heizung.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
$1,788.60
Make a selection
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Radio and heater control block off plates - until now, removing the center console from your 964/993 was not possible due to the required switches that were mounted in it. Rennline's new radio and heater control block off plates solve that problem. These plates have been specially designed to accept the factory switches installed in the center console of all 964/993 cars. Don't have the factory switches? No problem. These plates are also available without switch cutouts so you can install your own switches or gauges. Made from powder coated metal and installs in minutes on cars with the radio or heater controls removed.
General Fitment 911 1989-94 911 1994-98
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|